White Clay Hydrating Facial Mask

By: TOM BRANNA

Editor

Ingredients

%

Phase A

Schercemol NGDO Ester (Noveon)(Neopentyl glycol diethylhexanoate)
6.00

0

Promulgen D Emusifier (Noveon)(Cetearyl alcohol (and) ceteareth-20)
4.00

Schercemol DISD Ester(Diisostearyl dimer dilinoleate)(Noveon)
2.00

Lanette O (Cognis) (Cetearyl alcohol)
1.00

Vitamin E Acetate (BASF) (Tocopheryl acetate)
0.20

Stepan-Mild LSB (Stepan)(Sodium lauryl sulfoacetate (and) disodium laureth sulfosuccinate)
0.50

Blue 1 (O.1% solution)
5.00

Glycerin (Protameen)
4.00

Glucam E-20 Humectant (Noveon)(Methyl gluceth-20)
1.00

Eusolex T-S (EMD Chemicals)(Titanium dioxide (and) alumina (and)stearic acid)
0.50

Vegetol Seaweed CB 4136 Hydro (Gattefossu00e9)(Fucus vesiculosus (bladderwrack) extract, propylene glycol)
1.00

Cucumber aloe #EO5443 (Intercontinental Fragrances)
0.50

Phase B

Deionized water
42.50

Phase C

Kaolin USP (Whittaker, Clark & Daniels or Maprecos)
20.00

Phase D

Carbopol Aqua CC Polymer 20% (Noveon) (Polyacrylate-1 crosspolymer)
6.00

Phase E

Glycolic Acid (Acros)
0.30

Phase F

Phenonip (Clariant)(Phenoxyethanol, methyl-, ethyl-, butyl-, propyl-, (and) isobutylparaben)
0.50

Procedure

Combine all ingredients in phase A and heat to 70°C. Mix until uniform. Combine all ingredients in phase B in a separate vessel and heat to 70°C. Mix until uniform. Slowly add phase B to phase A using moderate agitation. Mix until uniform. In a dry vessel, mix Kaolin and titanium dioxide together. Slowly sieve phase C into the batch. Mix batch thoroughly until homogeneous. Allow batch to cool. Pre-mix phase D ingredients in a separate vessel. When batch has cooled to at least 55°C, add phase D to batch, mix until uniform. Adjust pH to 4.5-5.5 with glycolic acid. Mix until uniform. Continue cooling batch. When batch has cooled to 45°C, slowly add phase F ingredients to batch one at a time with mixing. Mix until uniform. Continue slow mixing until batch has cooled to 40°C.